Sony MKS-X1115 User Manual page 52

Transition type selection buttons
Function Button name
name
Mix MIX
NAM NAM
Super Mix SUPER MIX
Preset Color PST COLOR
Mix MIX
Wipe WIPE
DME Wipe DME WIPE
FM 1&2 Clip to FM1&2 CLIP
FM 15&16 Clip to FM15&16
CLIP
Wipe direction selection buttons
Function Button name
name
Normal NORM
Normal/ NORM/REV
Reverse
Reverse REV
Transition preview buttons
Function Button name
name
Transition TRANS PVW
Preview
Pattern limit setting buttons
Function Button name
name
Limit Set LIMIT SET
Pattern Limit PTN LIMIT
Description
Selects mix.
Selects NAM (non-
additive mix).
Selects super mix.
Selects preset color mix.
Selects wipe.
Selects DME wipe.
Selects clip transition.
Description
The wipe proceeds in the
direction from black to
white of the pattern
images, shown in "Wipe
Pattern List" (page 499),
or in the direction of the
arrows (normal).
The wipe direction
alternates between
normal and reverse after
each transition.
The wipe proceeds in the
opposite direction of
normal (reverse).
Description
Switches the transition
preview mode.
You can check a transition
using preview output.
Description
Sets the pattern limit.
Enables the pattern limit.
52
Main/sub switching buttons (multi program 2
mode)
Function Button name
name
Main MAIN
Sub SUB
c Display
The display shows the following information.
• Left-side display:
Target switcher bank name (M/E1 to M/E5, P/P)
Main and sub assignment status when in multi program
2 mode (MAIN, SUB, MAIN&SUB)
• Right-side display:
Transition rate
During key priority setting operation, the display shows
the following information.
• Left-side display:
State (displayed highlighted when on) and priority of
key 1 to key 4
Main and sub assignment status when in multi program
2 mode (M, S)
• Right-side display:
State (displayed highlighted when on) and priority of
key 5 to key 8
Main and sub assignment status when in multi program
2 mode (M, S)
d Independent key transition execution section
(assignable buttons)
You can assign execution buttons for independent key
transitions in the Home > Setup > Panel > Module >
Button Assign menu (19104.21).
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 408).
Function Button name
name
Key 1 KEY1 TRANS
Transition to to KEY8
Key 8 TRANS
Transition
Key 1 On to KEY1 ON to
Key 8 On KEY8 ON
Description
Switches operation to the
function on the main side
in multi program 2 mode.
Simultaneously pressing
the [SUB] button activates
both the main and sub
operations.
Switches operation to the
function on the sub side in
multi program 2 mode.
Description
Inserts or removes a key
automatically with the set
transition rate and
transition type.
During the transition, the
button is lit amber.
Inserts or removes a key
instantaneously.
If a key is currently
inserted, the button is lit
amber.