Table of Contents
Advertisement
Function
Button
Description
name
name
Center
CTR
• When the [CTR] button is
• When the [CTR] button is
Menu parameter operation mode
Used to set menu parameters.
For details about menu parameter operations, see
"Setting Parameters" (page 77).
Function
Button
Description
name
name
X
X
• Restricts the parameters
Y
Y
Z
Z
• When the [X] button, [Y] button,
Fine
FINE
Switches to fine mode, enabling
fine adjustment control of setting
values using the trackball and
Z-ring.
Device/frame memory/clip player operation
mode
This mode controls operations of devices such as VTRs/
disk recorders and operations of frame memory/clip
players.
For details about device operations, see "Control of
VTRs and Disk Recorders" (page 220).
For details about frame memory operations, see "Playing
Video" (page 187).
pressed once:
Adjusts the three-dimensional
transform parameters to the
detent positions.
pressed twice, or the [CTR]
button is pressed once while
pressing the [SHIFT] button:
Returns the three-dimensional
transform parameters to the
default values.
targeted by the operation.
When the [X] button is lit:
Operations on parameter
number 1 using the trackball
are enabled.
When the [Y] button is lit:
Operations on parameter
number 2 using the trackball
are enabled.
When the [Z] button is lit:
Operations on parameter
number 3 using the Z-ring are
enabled.
and [Z] button are lit green, you
can enter parameter settings
using the numeric keypad
control block.
For details about clip player operations, see "Playing
Video" (page 194).
c Trackball
This adjusts the parameters of items selected in resizer
operation mode, three-dimensional transform operation
mode, and menu parameter operation mode.
d Z-ring
This adjusts the parameters of items selected in resizer
operation mode, three-dimensional transform operation
mode, and menu parameter operation mode.
It is used for playback operations in device/frame
memory/clip player operation mode.
It can control an effect timeline in run control operation
mode.
e Display
Resizer operation mode
The following information is displayed.
• Reference switcher bank name: M/E1 to M/E5, P/P
• Reference resizer name: KEY1 RSZR to KEY8 RSZR
• Selected parameter name: ASP, LOC SIZE, ROT
PERS, BDR, CROP
• X-axis, Y-axis, and Z-axis settings (four edge settings
for crop)
Three-dimensional transform operation mode
The following information is displayed.
• Reference DME channel name: DME1 to DME4
• Selected three-dimensional space: LOCAL, GLB and
SRC, TRGT
• Selected parameter name: ASP PERS, LOC SIZE, LOC
XYZ, ROT, AXIS LOC, SPIN, SKEW
• X-axis, Y-axis, and Z-axis settings
Menu parameter operation mode
"MENU" is displayed.
Run control operation mode
The following information is displayed.
• Reference region name
• Register number, register name
• Effect duration
• Current keyframe number, total number of keyframes,
current timecode
Device/frame memory/clip player operation
mode
The following information is displayed.
• Recalled file name (for disk recorder)
• Recalled content name (for frame memory/clip player)
• Current timecode, start point timecode, stop point
timecode
39
Advertisement
Table of Contents
