Table of Contents
Advertisement
10
Press the [Address] button for [IPv6] and enter an
address using the keyboard.
Note
When multiple network interfaces are selected,
consecutively numbered IP addresses are set.
11
Press the [Prefix Length] button for [IPv6] and enter
a prefix length in the numeric keypad window.
Note
When multiple network interfaces are selected, the
same prefix length is set for all selected network
interfaces.
12
Press [OK].
13
Press the [Apply] button.
To return to the previous setting
Press the [Clear] button, check the message, then
press [OK].
14
Check the message, then press [OK].
Setting the host name of a box
1
Open the MLS Manager Home > System > Off-Island
> Box Network menu (60219.01).
2
Press the [Detect/Refresh] button.
Boxes that are on the same network as MLS Manager
and are not assigned to an island are detected.
3
In the [Box] group list, select the target box to set.
4
Press the [Edit Hostname] button and enter a host
name (up to 63 characters) using the keyboard.
5
Press [OK].
6
Press the [Apply] button.
To return to the previous setting
Press the [Clear] button, check the message, then
press [OK].
7
Check the message, then press [OK].
Setting the default gateway of a box
1
Open the MLS Manager Home > System > Off-Island
> Box Network menu (60219.01).
2
Press the [Detect/Refresh] button.
Boxes that are on the same network as MLS Manager
and are not assigned to an island are detected.
3
In the [Box] group list, select the target box to set.
4
Press the [Edit Gateway] button.
The [Default Gateway Settings] window appears.
5
Press the [LAN] button for [IPv4] and select the
target LAN to set from the pull-down list.
Select [Ctrl LAN], [Util LAN 1], [Util LAN 2], [User
LAN 1], or [User LAN 2].
When not using the IPv4 default gateway, select [No
Assign].
The [Mode] setting for [IPv4] is linked to the selected
LAN setting. When set to [Off] or [DHCP], proceed
to step 7.
6
Press the [Address] button for [IPv4] and enter an
address using the keyboard.
7
Press the [LAN] button for [IPv6] and select the
target LAN to set from the pull-down list.
Select [Util LAN 1], [Util LAN 2], [User LAN 1], or
[User LAN 2].
When not using the IPv6 default gateway, select [No
Assign].
The [Mode] setting for [IPv6] is linked to the selected
LAN setting. When set to [Off], [Auto], or [DHCP],
proceed to step 9.
8
Press the [Address] button for [IPv6] and enter an
address using the keyboard.
9
Press [OK].
10
Press the [Apply] button.
To return to the previous setting
Press the [Clear] button, check the message, then
press [OK].
11
Check the message, then press [OK].
Setting the DNS server of a box
1
Open the MLS Manager Home > System > Off-Island
> Box Network menu (60219.01).
2
Press the [Detect/Refresh] button.
Boxes that are on the same network as MLS Manager
and are not assigned to an island are detected.
486
Advertisement
Table of Contents
