Table of Contents
Advertisement
Speed
Rotates a pattern at a fixed speed.
Magnitude
Rotates a pattern through the specified angle in a single
transition.
1
Open the Home > M/E-1 > Bus/Transition > Wipe >
Main Modify menu (11109.35).
2
In the [Rotation] group, select a rotation type.
When the [Angle] button is selected, set the following
parameter.
No.
Parameter
1
Angle
When the [Speed] button is selected, set the following
parameter.
No.
Parameter
1
Speed
When the [Magnitude] button is selected, set the
following parameters.
Adjustment
Inclination angle of pattern
• A value of –100.00
corresponds to a rotation of
one turn counterclockwise.
• A value of +100.00
corresponds to a rotation of
one turn clockwise.
• A value of 0.00
corresponds to no rotation.
Adjustment
Rotation speed of pattern
• A value of –100.00
corresponds to 1 revolution/
second counterclockwise
rotation.
• A value of +100.00
corresponds to 1 revolution/
second clockwise rotation.
• A value of 0.00
corresponds to no rotation
(stationary).
No.
Parameter
1
Angle
2
Magnitude
Setting the aspect ratio of a wipe pattern
(Aspect)
You can change the aspect ratio of a pattern.
Aspect disabled
1
Open the Home > M/E-1 > Bus/Transition > Wipe >
Main Modify menu (11109.35).
2
Set the [Aspect] button to the on state and set the
following parameter.
No.
Parameter
1
Aspect
Replicating a wipe pattern (Multi)
You can replicate a pattern horizontally, vertically, or
both up to 63 times.
You can also change the orientation of alternate patterns
or change the position.
158
Adjustment
Angle of pattern at start of
transition
• A value of –100.00
corresponds to a rotation of
one turn counterclockwise.
• A value of +100.00
corresponds to a rotation of
one turn clockwise.
• A value of 0.00
corresponds to no rotation.
Angle of rotation through
course of transition
• A value of –200.00
corresponds to a rotation of
two turns counterclockwise.
• A value of +200.00
corresponds to a rotation of
two turns clockwise.
• A value of 0.00
corresponds to no rotation.
Aspect enabled
Adjustment
Aspect ratio
• Negative values expand
vertically.
• Positive values expand
horizontally.
Advertisement
Table of Contents
