Table of Contents
Advertisement
Bus
b)
Utility 1 bus
b)
Utility 2 bus
b)
DME external video bus
b)
DME utility 1 bus
b)
DME utility 2 bus
Edit preview bus
AUX1 bus to AUX48 bus
Assignment operation
• ICP-X7000: Press
delegation buttons [UTL1]
and [UTL2], turning them
c)
on.
• ICP-X1000 series: Press
delegation buttons [UTIL1]
and [UTIL2], turning them
c)
on.
• To assign to the 2nd row in
key/AUX bus delegation
mode, press the [UTIL1]
and [UTIL2] buttons in the
1st row, turning them on.
• Press delegation button
c)
[DME EXT], turning it on.
• To assign to the 2nd row in
key/AUX bus delegation
mode, press the [DME
EXT] button in the 1st row,
turning it on.
• ICP-X7000: Press
delegation buttons [DME
UTL1] and [DME UTL2],
c)
turning them on.
• ICP-X1000 series: Press
delegation buttons [DME
UTIL1] and [DME UTIL2],
c)
turning them on.
• To assign to the 2nd row in
key/AUX bus delegation
mode, press the [DME
UTIL1] and [DME UTIL2]
buttons in the 1st row,
turning them on.
• In free assign mode, press
delegation button [EDIT
PVW], turning it on.
• To assign to the 2nd row in
key/AUX bus delegation
mode, press the [EDIT
PVW] button in the 1st row,
turning it on.
• In free assign mode, press
delegation buttons [AUX1]
to [AUX48], turning them
on.
• To assign to the 2nd row in
key/AUX bus delegation
mode, press the [AUX1] to
[AUX48] buttons in the 1st
row, turning them on.
Bus
Frame memory source 1 bus
Frame memory source 2 bus
DME1 video bus to DME4
video bus
DME1 key bus to DME4 key
bus
a) Dual background bus mode can be selected.
b) Can also be assigned in utility bus mode.
c) Can be assigned to the 1st row and 2nd row in key bus mode, or to the 1st
row to 4th row in free assign mode.
Dual background bus mode
You can select the background A bus (3rd row) shifted-
state signal in the 1st row, and the background B bus (4th
row) shifted-state signal in the 2nd row.
To set dual background bus mode, press the [DUAL
BKGD BUS] button, turning it on.
Notes
• The [DUAL BKGD BUS] button must be assigned to
the cross-point pad/function button section.
For details about assigning buttons in the cross-point
pad, see "Setting a Cross-Point Pad" (page 416).
For details about assigning buttons in the function
button section, see "Assigning Control Panel Buttons"
(page 408).
• Dual background bus mode is not available in the
following cases.
- In free assign mode
- When dual M/E is set
- When the switcher bank operation mode is DSK
mode
89
Assignment operation
• In free assign mode, press
delegation buttons [FMS1]
and [FMS2], turning them
on.
• To assign to the 2nd row in
key/AUX bus delegation
mode, press the [FMS1]
and [FMS2] buttons in the
1st row, turning them on.
• In free assign mode, press
delegation buttons
[DME1V] to [DME4V],
turning them on.
• To assign to the 2nd row in
key/AUX bus delegation
mode, press the [DME1V]
to [DME4V] buttons in the
1st row, turning them on.
• In free assign mode, press
delegation buttons
[DME1K] to [DME4K],
turning them on.
• To assign to the 2nd row in
key/AUX bus delegation
mode, press the [DME1K]
to [DME4K] buttons in the
1st row, turning them on.
Advertisement
Table of Contents
