Sony MKS-X1115 User Manual page 41

Function name Button name Description
– ALL
c Operation buttons
Button name Description
UNDO After recalling a register, returns to
the state before the register was
recalled.
STORE STATS Lights up amber when an effect
timeline/snapshot/shotbox/macro
is saved in a register.
While the [STORE STATS] button
is lit amber, you can press and
hold the [STORE STATS] button
and press the [UNDO] button to
return to the state before saving.
TC Switches to timecode input mode.
STORE Switches to the mode for saving an
effect timeline/snapshot/shotbox/
macro.
In save mode, the [STORE] button
is lit amber.
RCALL Switches to the mode for recalling
an effect timeline/snapshot/
shotbox/macro.
In recall mode, the [RCALL] button
is lit amber.
d Numeric keypad
Use to enter numeric values and to add an effect timeline/
snapshot attribute. Entered numeric values appear on the
display.
It is also used to enter numeric values in conjunction with
setting parameters in the device control block, setting the
transition rate in the utility/shotbox control block, and
other tasks.
Button name Description
0 to 9 Enters numeric values.
. (period) • Enters a decimal point.
• In timecode input mode, "00" is
entered.
• In effect timeline operation mode
and snapshot operation mode,
use to search for an empty
register.
Select all regions
configured
beforehand
If you press the
[ALL] button while
a region is
selected, all
regions are
deselected.
The [GPI ENBL] button function is not supported.
e Display
The following information is displayed.
• Left-side display (lines 1 to 3) and right-side display
• Right-side display (lines 3 to 4):
41
Button name Description
+/– • Inverts the + (plus) and – (minus)
EFF DISS
signs.
• In effect timeline operation mode
and snapshot operation mode,
use to add the effect dissolve
attribute.
CLR • Deletes the entered numeric
AUTO TRANS
value.
• In snapshot operation mode,
use to add the auto transition
attribute.
TRIM Use when entering difference
GPI ENBL values.
Enter a numeric value and press
the [TRIM] button to increase/
decrease a setting value.
ENTER • Confirms the entered numeric
value.
• For a register number, executes
a register recall/save.
Note
(lines 1 to 2):
Selected region names (reference region is highlighted)
Register numbers, reference region name, numeric
values entered in the numeric keypad, and other items