Name And Function Of Parts; Front Panel - Sony BPU4000 Operation Manual

Name and Function of Parts

Front Panel

a Red tally light
Turns on when a red tally signal is received. When the CALL
button on the video camera, the MSU-1000 Master Setup Unit,
or the RCP-3000/1000 series Remote Control Panel is
pressed, the light turns off if lit or turns on if not lit.
A supplied number plate can be attached (see following
diagram).
b Yellow tally light
Turns on when a yellow tally signal is received.
c Green tally light
Turns on when a green tally signal is received.
d CCU number display
Displays the camera number specified in the menu of the CCU
for a system connection.
A number is not displayed when this unit is used as an
extension unit.
e MENU control block
DISP/MENU lever and indicator
CANCEL/ENTER lever
MENU
DISP CANCEL
MENU ENTER
Control knob
DISP/MENU lever and indicator: Used to display the status
and menu. The indicator lights up when the menu is
displayed.
CANCEL/ENTER lever: Used to cancel/enter settings when
the menu is displayed.
a b c d e f
MENU REF IN
UNLOCK
DISP CANCEL
COM ERROR
POWER FAN STOP
OPTICAL CONDITION MENU LOCK
MENU ENTER
OFF ON
SW
CAM BPU CCU
NETWORK
g h i k
BASEBAND PROCESSOR UNIT BPU-4 0 0 0
j
USB connector (for service personnel)
Control knob (rotary encoder): Used to switch pages when
the status screen is displayed. Used to move the cursor
within a page and to change the setting of the selected
item when the menu is displayed.
Pushing the control knob has the same function as setting
the CANCEL/ENTER lever to ENTER.
f Status display indicators
REF IN (green): Indicates presence of reference input signal.
UNLOCK (red): Indicates operation is not synchronized to
input reference signal.
When connected to a CCU, REF IN and UNLOCK indicate
the lock status for the CCU.
COM ERROR (red): Indicates a communications error with
the video camera, CCU, or external control device (such as
an RCP-3000/1000 series Remote Control Panel).
FAN STOP (red): Indicates the internal fan has stopped.
g POWER switch and indicator
Turns the system power supply on/off to the unit, video
camera, and RCP-3000/1000 series Remote Control Panel or
other device connected to the REMOTE connector. Switch to
"?" to turn the power on, and switch to "a" to turn the power off.
The indicator lights up when power is turned on.
h Optical signal condition indicators
Displays the communications link optical signal level condition
between the video camera, CCU, and the unit.
CAMTBPU: Signal level from the unit to the video camera
CAMtBPU: Signal level from the video camera to the unit
BPUTCCU: Signal level from the CCU to the unit
BPUtCCU: Signal level from the unit to the CCU
Indicates the receive signal status according to the following
indicators.
Two green indicators (right): Receive signal condition is very
good.
One green indicator (2nd from right): Receive signal
condition is OK.
One yellow indicator (2nd from left): Receive signal level is
weak.
One red indicator (left): Receive signal level is severely
degraded.
10