Color Control Function For The Monitor Output - Sony HKSR-5804 Operation Manual

2
Set the following items.
Item Function/settings
BANK Selects one of the eight banks
(BANK 1 to BANK 8).
WP check box Check this box when you do not
want to overwrite the contents of
the selected LUT bank.
3
Click the Browse... button to open the local disk or
external media of the web client, then select the LUT
file. And then, click the LOAD button.
The selected LUT file is loaded to the LUT bank
selected in step 2.
Clearing the contents of a LUT bank
Select the bank whose contents you want to delete, and
then click the CLEAR button.
Checking the name of files loaded to the
LUT bank from the VTR
Use the NETWORK2 SETUP menu from the OTHERS
CHECK menu in the MAINTENANCE menu of the VTR.
For details on the MAINTENANCE menu of the VTR, refer
to the Installation Manual supplied with the SRW-5800.
Color Control Function for the
Monitor Output
Color control function for the monitor output (AUX
OUTPUT connectors) can be set using the web application
or through control panel operation on the VTR.
Settings using the web application
1
Access the VTR from the web client to display the web
application, click the VTR SETUP menu select button,
and then click the MONITOR tab.
The MONITOR tag display appears.
2
Set the following items.
In the table below, the default setting is indicated by an
asterisk (*).
Item Function/settings
COLOR SPACE Specifies the monitor output
signal type.
RGB 4:4:4
YCbCr: YcbCr 4:2:2 signal
LUT Selects one of the eight banks.
Off
BANK1 to BANK8: The LUT in the
RANGE Specifies whether the monitor
output signal is extended from
Head to Full before the LUT and
compressed from Full to Head
after the LUT.
Pre(HtF) checkbox: Check this
Post(FtH) checkbox: Check this
Settings on the control panel of the VTR
Color control function for the monitor output can be set
with the NW CTRL MENU from the VTR SETUP menu
in the SETUP menu provided on the VTR.
For details on the SETUP menu of the VTR, refer to the
Operation Manual supplied with the SRW-5800.
1
On the VTR, display the NW MON CTRL menu from
the VTR SETUP menu.
*
: RGB 4:4:4 signal
*
: No LUT is used.
specified bank is applied to
the monitor output.
box to extend the effective
signal range of a monitor
output signal with headroom
to full range before the LUT.
box to compress a full range
monitor output signal to the
effective signal range of a
monitor output signal with
headroom after the LUT.
Controlling the On-board Functions
33