Enable Rip - Paradyne 1862 User Manual

1862 VoIP IAD User's Guide

5.4.1 Enable RIP

To enable RIP, complete the following steps:
STEP 1: Click on Routing Setup on the menu bar.
STEP 2: Select On in the Rip Status field.
STEP 3: Select a RIP Version (Version 1 or Version 2) from the Version field.
STEP 4: Click on Apply to submit the settings.
STEP 5: After submitting the new Rip settings, the List of Static Routes will be updated to
reflect this change. A screen similar to the following will be displayed:
Flag: R = RIP Route, S = Static Route, C = Connect Route
37