Video Input Connector On The Pc/104-Plus Form Factor - Matrox Meteor-II Installation And Hardware Reference Manual

48 Appendix B: Technical information
An open-ended version of this cable, the DH44-TO-8BNC/O, is also available
and can be customized to access signals in addition to those described above. For
customers planning to build their own cable, parts can be purchased from:
• Manufacturer:
• Connector:

Video input connector on the PC/104-Plus form factor

The video input connector on the Matrox Meteor-II /Multi-Channel for
PC/104-Plus is located on the top side of the board. Its pinout is as follows:
Pin Signal
2 VID1_IN1
4 VID1_IN2
6 VID1_IN3
8 SYNC_IN
10 VID2_IN1
12 VID2_IN2
14 VID2_IN3
15 USER(2)_IN
16 USER(1)_IN
17 USER(2)_OUT
18 USER(1)_OUT
19 EXP(1)
20 EXP(2)
22 TRIG
23 OPTOTRIG-
24 OPTOTRIG+
26 CLK_IN
NorComp Interconnect Devices
HDT44P
1
2
I/O Description
I RED Analog Video Input (Channel 1).
I GREEN Analog Video Input (Channel 1).
I BLUE Analog Video Input (Channel 1).
I Analog Video Input (SYNC).
I RED Analog Video Input (Channel 2).
I GREEN Analog Video Input (Channel 2).
I BLUE Analog Video Input (Channel 2).
I Auxiliary User Input #2.
I Auxiliary User Input #1.
O Auxiliary User Output #2.
O Auxiliary User Output #1.
I Exposure #1 (TTL).
I Exposure #2 (TTL).
I Trigger (TTL).
I Opto-isolated trigger negative input.
I Opto-isolated trigger positive input.
I Clock input (TTL).
29
30