Kaco blueplanet gridsave 92.0 TL3-S Manual page 61

Manual
Country- Level Display/
spec. Set- Setting
tings
Service logging interval
1 2 3 4 4
1 – 120 [sec] /
[sec] /
PCU logging interval
1 2 4 4
3
1 – 120 [sec] /
[sec] /
Analyze Log Data
2
1 3 4 4
User logs
1 2 4 4
3
cosPhi | fac (Hz) |
lac 1 (A) | lac2 (A) |
lac3 (A) | idc (A) | Qac
(var)
Parameter Manage-
1
2 3 4 4
ment
Factory setting
2
1 3 4 4
Export config
2
1 3 4 4
Import configuration
2
1 3 4 4
Password protection
2
1 3 4 4
Country selection |
Connection conditions
| Advanced islanding
detection | FRT | ... | ...
|
Installation Wizard
2
1 3 4 4
Network Statistics
3
1 2 4 4
Remote Access
3
1 2 4 4
History
2
1 3 4 4
Account Management
2
1 3 4 4
Restart the Device
2
1 3 4 4
blueplanet gridsave 92.0 TL3-S blueplanet gridsave 110 TL3-S blueplanet gridsave 137
TL3-S
Action in this menu/meaning
F Specify the time period between 2 log data recordings.
10 NOTE: Setting and time until memory is overwritten: 1 sec – 9 days; 10
1 sec – 92,5 days; 120 sec - 1110 days
F Specify the time period between 2 log data recordings.
10 NOTE: Setting and duration until memory is overwritten: 1 sec – 9
1 days; 10 sec – 92,5 days; 120 sec - 1110 days
NOTE: All measurement data can be transferred to a USB stick by mak-
ing individual and multiple selections.
1. Select a date in the calendar.
2. Select measurement data from the dropdown field.
3. Update the measurement data.
4. Move the selected measurement data to the storage device or
move the data selectively.
NOTE: Opportunity to reset set values as well as to import and export
specific parameters.
1. Compare all parameters/ country-specific parameters /network-
specific parameters with basic setting value.
2. If necessary, reset parameters using the "Restore" button.
1. Exporting parameters for device-independent settings / Export all
settings.
2. Select the parameters for export into a file or the plant manager.
1. Select the parameter file using the "Browse" button.
2. Import the parameters using the "Upload" button.
1. Opportunity to set up password protection for individual paramet-
ers.
2. Confirm the action field.
NOTE: The installation wizard is described in the chapter [See sec-
tion 8.2} Page 30].
When the installation process is complete, the text: Installation wizard
was completed appears
NOTE: Sent and received data packets indicator
F Press Refresh.
When remote access is enabled, KACO can access the device remotely
and assist you.
F Activate on request.
NOTE: Displays all of the actions performed in the system and on the
web interface.
1. Enter your User name.
2. Enter your new user-defined Password.
NOTE: The following is specific to KACO: Following initial start-up, it is
necessary to Change password
NOTE: Transfer safety-related parameters to a storage medium.
F If necessary, re-start the device.
Configuration and operation | 9
Page 61