Kaco blueplanet gridsave 92.0 TL3-S Manual page 59

Manual
Country- Level Display/
spec. Set- Setting
tings
Reset
Apply and save
Apply
Watchdog time
1 2 3 4 4
Lokal / EMS / Active
1 2 3 4 4
30[s]
Battery limits (tempor-
1 2 4 4
3
ary)
Minimum discharge
1 2 3 4 4
voltage
Maximum discharge
current
Minimum discharge
current
Maximum charge
voltage
Maximum charge cur-
rent 0.1
Minimum charge cur-
rent 0.1
Battery limits enabled
1 2 4 4
3
0 / 1
P Setpoint
4 4
1 2 3
Setpoint active power
1 2 3 4 4
0 – 100 [% Pmax]/
0 [% Pmax]
Power gradient in-
1 2 3 4 4
creasing & power
gradient decreasing
1 – 65534 [% Slim /
min] /
Slim / min /
Settling time
1 2 3 4 4
1000 – 12000 [ms] /
5000 [ms] /
Active power enabled
1 2 3 4 4
0 / 1
Q Setpoint
1 2 3 4 4
Reactive power set-
1 2 3 4 4
point
0 - 100 [% VarMax] /
0 [% VarMax]/
blueplanet gridsave 92.0 TL3-S blueplanet gridsave 110 TL3-S blueplanet gridsave 137
TL3-S
Action in this menu/meaning
F Reset to default value or
F Set and save value or
F Take over parameters for current session.
NOTE: Possibility to monitor the entire system
F Set time for monitoring the connection.
F NOTE: Possibility to test which battery limits are received by the
EMS. Optionally, this can be set to detect faults.
F Set the minimum discharge current.
0.1
F Set the maximum discharge current.
0.1
F Set minimum charging voltage.
0.1
F Set maximum charging voltage.
0.1
F Set the maximum charging current for the battery.
F Set the minimum charging current for the battery.
F All set values are transmitted and used with 1.
NOTE: Define active power specification
F Set the setpoint of the active power.
0.1
1. Maximum change in the reactive power %S
change to over-excited mode.
2. Maximum change in the reactive power %S
change to under-excited mode.
65534 [%
1
F Set the settling time in the event of an abrupt change in the reactive
power target value.
10
F All set values are transmitted with 1 and used.
NOTE: Define Q Setpoint
F Set reactive power Q to a fixed value
0.0
Configuration and operation | 9
/min in the event of a
lim
/min in the event of a
lim
Page 59