Kaco blueplanet gridsave 92.0 TL3-S Manual page 10

3 | Description of the device Manual
3.2.2 Interfaces
You can configure the interfaces and the web server in the Settings menu. The device has the following interfaces for
communication and remote monitoring:
Ethernet interface
Communication with the EMS/PMS is carried out via the Ethernet interface.
The local web server can be used to configure the device and perform updates.
USB port
The device's USB connection is a type A socket. It is located on the communication circuit board. The USB connection is
specified to draw 5V/500 mA of current.
Use the USB interface to read out stored operating data, load firmware updates or device configurations using a FAT32-
formatted USB stick (max. 4GB).
It is possible to establish a connection to the webserver integrated into the device by connecting a USB-WiFi stick. In addi-
tion to commissioning, service information and firmware updates, more extensive configurations are also possible via the
web interface.
Page 10 blueplanet gridsave 92.0 TL3-S blueplanet gridsave 110 TL3-S blueplanet gridsave 137
TL3-S