Kaco blueplanet gridsave 92.0 TL3-S Manual page 20

6 | Assembly and preparation
CAUTION
Risk of damage to property as a result of condensation
During pre-assembly of the device, moisture can penetrate into the interior via the dust-protected threaded connections.
The resulting condensate can cause damage to the device during installation and start-up.
ü Keep the device closed during pre-assembly and do not open the connection area until you perform installation.
1. Seal off the screw connections using sealing covers.
2. Prior to installation, check the inner area for condensation and if necessary, allow it to dry sufficiently before installa-
tion.
3. Immediately remove any moisture from the housing.
Page 20 blueplanet gridsave 92.0 TL3-S blueplanet gridsave 110 TL3-S blueplanet gridsave 137
Manual
TL3-S