Kaco blueplanet gridsave 92.0 TL3-S Manual page 46

9 | Configuration and operation
Country- Level Display/
spec. Set- Setting
tings
Connection Conditions
2
4
1 3 4
Min. conn. voltage
4
1 2 3 4
after grid mon.
10 – 110 [% Unom] /
0.1 &
Max. conn. voltage
after grid mon.
90 – 125 [% Unom]
0.1
Min. conn. frequency
1 2 3 4 4
after grid mon.
45 – 65 [Hz] /
&
Max. conn. frequency
after grid mon.
45 – 65 [Hz] /
Min. conn. voltage
1 2 3 4 4
after grid failure
10 – 110 [% Unom] /
0.1 &
Max conn. voltage
after grid failure
90 – 125 [% Unom]
0.1
Min. conn. frequency
1 2 3 4 4
after grid failure
45 – 65 [Hz] /
&
Max. conn. frequency
after grid failure
45 – 65 [Hz] /
Monitoring time grid
1 2 3 4 4
voltage
1000 – 1800000
[ms] /
1000 &
Monitoring time PV
voltage
1000 – 1800000
[ms] /
1000
Waiting time after grid
1 2 3 4 4
failure
1000 – 1800000
[ms] /
1000
Password protection
Status
Page 46
Action in this menu/meaning
NOTE: Precise connection conditions should be specified relative to
the grid conditions.
F Specify switch-on voltage range after grid error.
F Specify switch-on frequency range after grid error.
0.01
0.01
F Specify switch-on voltage range after grid error.
F Specify switch-on frequency range after grid error.
0.01
0.01
F Specify the time for monitoring the grid voltage and PV voltage.
60000 /
60000 /
1. Set waiting time after grid failure.
2. Activate optional password protection.
3. Confirm the action field.
60000 /
blueplanet gridsave 92.0 TL3-S blueplanet gridsave 110 TL3-S blueplanet gridsave 137
Manual
TL3-S