Kaco blueplanet gridsave 92.0 TL3-S Manual page 31

Manual
Option 5:
Centralised start-up via Segment Controller
Tab. 2: Start-up variants for individual devices or system segments
8.2.1 Start-up via WIFI
The following figure provides an example of the structure of a KACO device with string combiner (SC) and mobile devices
connected without cables.
Application
The planned network infrastructure or AC-coupling is not yet in place or has not been completed.
A DC supply to the KACO device is sufficient for start-up.
Required components
– WiFi-compatible notebook, tablet or smartphone (Android or iOS devices can be used).
– USB WiFi stick (KACO accessory, type: WLAN adapter Digitus 150 N micro article no.: 3013222)
Establishing a connection to the KACO device via WiFi
F Connect the USB WiFi stick to the device and connect to the access point generated by the device using a notebook or
mobile device. The WIFI SSID corresponds to the serial number of the device, which is printed on the type plate.
F Name of access point: <Device designation serial number> (e. g. „bg92-<serial number>" or„bg137-<serial number>")
1. Password: kacowifi
2. Launch the browser on the terminal device and enter server name a) or server address b):
F http:// 192.168.1.1
F Confirm entry.
ð The device configuration page is displayed.
1. At the Login/register icon, log in as:
2. User name: user
3. Password: kaco user
4. Assign a new user name and password.
8.2.2 Start-up via LAN connection
The following figure provides an example of the structure of a KACO device with string combiner (SC) and mobile devices
connected directly via Ethernet.
MODBUS RTU
RS485
DC
EMS Battery inverter
Ethernet Port 0
(Static IP)
Fig. 33: Start-up via Ethernet
Application
The planned network infrastructure or AC-coupling is not yet in place or has not been completed.
A DC supply to the KACO device is sufficient for start-up.
blueplanet gridsave 92.0 TL3-S blueplanet gridsave 110 TL3-S blueplanet gridsave 137
TL3-S
– A device configuration that is available on the Segment
– The devices are ready for operation once the configura-
Ethernet
Notebook
Ethernet
Notebook
Commissioning | 8
Controller can be uploaded to several KACO inverters.
tion is activated.
Fig. 32: Login screen
Page 31