Signal Elements - Kaco blueplanet gridsave 92.0 TL3-S Manual

9 | Configuration and operation
Step: Finalisation
↻ Optional parameters have been set.
1. Generate installation report (includes a list of all relevant parameters for accept-
ance purposes)
2. Specify a name for the device installation report.
3. Confirm the action field.
NOTE: All of the settings can also be transferred to another device in the same
series (provided that no individual parameters are required, e.g. static IP address).
1. Optional: Export current device settings to the client.
2. Device configuration completed successfully. Please click "Finish" to put the
device into operation.
ð The initial installation is now complete. Set access to device(s) and "connect net-
work" via the user area AC.
9.2

Signal elements

The 3 LEDs on the device show the different operating states. The LEDs can display the following states:
LED illuminated
Operating status LED status
Start
Feed-in start
Feed-in mode with re-
duced power
No grid operation
Fault
Fault
Page 36
LED flashing
Description
The green "Operating" LED is on when the AC voltage is present, inde-
pendent of the DC voltage.
If the LED is flashing, internal communication between the components
is being established. After flashing, the device is ready for feed-in.
If the LED continues to flash for a long time, there is an internal commu-
nication error.
The green "Operating" LED is lit.
The green "Grid operation" LED is lit after the country-specific wait-
ing period*.
Ready for grid operation. The charging/discharging current is displayed
via the WEB interface.
You can hear the circuit-breaker / interface switch switch on.
The green "Operating" LED is illuminated.
The green LED "Grid operation" is flashing because one of the modes:
internal power reduction, external power reduction, idle power request
or standalone mode is active.
Ready for grid operation. The charging/discharging current is displayed
via the WEB interface.
You can hear the circuit-breaker / interface switch switch on.
The green "Operating" LED is lit.
No LED is lit.
Error on the device or AC/DC source
The red "Fault" LED is illuminated.
Fault in the AC/DC source
Conditional special cases:
blueplanet gridsave 92.0 TL3-S blueplanet gridsave 110 TL3-S blueplanet gridsave 137
Manual
Fig. 42: Menu item: Only on the in-
stallation wizard!
LED not illuminated
TL3-S