Kaco blueplanet gridsave 92.0 TL3-S Manual page 57

Manual
Country- Level Display/
spec. Set- Setting
tings
3rd party device
1 2 3 4 4
3rd party device name
3rd party device opera-
tion mode
On | Off
DC Settings
1
2 3 4 4
Minimum battery
1 2 3 4 4
voltage
668/801/1002 -
1315 [V] /
tion 4} Page 12] /
Extended DC voltage
1 2 3 4 4
range
Active / deactivated
deactivated
UD, IL Maximum battery
1 2 3 4 4
voltage
1315 – 1450 [V] /
1315 /
Communication
1
2 3 4 4
Ethernet
2
1 3 4 4
IP Settings
3
1 2 4 4
DHCP
1 2 3 4 4
Status
IP Address
1 2 3 4 4
Subnet Mask
1 2 4 4
3
Default gateway
1 2 3 4 4
DNS server settings via
1 2 3 4 4
DHCP
Status
Primary DNS &
1 2 3 4 4
Secondary DNS (op-
tional)
Web Settings
1 2 4 4
3
HTTP Port
HTTPS Port
blueplanet gridsave 92.0 TL3-S blueplanet gridsave 110 TL3-S blueplanet gridsave 137
TL3-S
Action in this menu/meaning
NOTE: Configures the grid shutdown via a 3rd party device connected
to the digital input of the device
F Enter the name of the 3rd party device.
F Select operation mode.
On: The digital signal of the 3rd party device must be on the device's di-
gital input so that the device does not shut down.
Off: The device does not check whether a 3rd party device is integrated
into the PV system.
Input masks for DC source (PV generator/battery)
NOTE: The minimum battery voltage is automatically set according to
the country-specific grid code.
F Make the setting according to the system integrator's specifications.
[See sec-
-
WARNING! Use the function only to enable the grid connection when
the actual battery voltage U
voltage U
F Set increased maximum battery voltage for country setting "User
defined" or "Israel".
0.1
Input screens for configuring the interfaces.
NOTE: Opportunity to parametrise the Ethernet interface.
NOTE: Parametrization of network access.
F Activate or deactivate DHCP.
On: Once the DHCP server becomes available, the IP address, subnet
mask, gateway and DNS server are automatically applied and the afore-
mentioned menu options are filled out.
Off: Apply settings manually.
F Allocate a unique IPv4 address in the network.
F Assign a subnet mask.
F Enter IPv4 address of the gateway.
F Activate or deactivate the DNS server from the DHCP.
On: Once the DHCP server becomes available, the IP address is automat-
ically applied and the aforementioned menu options are filled out.
Off: Apply settings manually.
1. Enter IPv4 address of DNS server.
2. Confirm the action field.
NOTE: Option to set the http port.
F Set the port at which the web server can be reached.
1. Set the secured port at which the web server can be reached.
2. Confirm the action field.
Configuration and operation | 9
, is lower than the minimum DC
DC ACT
, that is required for AC grid connection.
DC,MIN
Page 57