Operational Safety; Operational Guidelines; Ozone Release; Printer Location - Xerox WorkCentre EC7856 User Manual

Safety

Operational Safety

Your printer and supplies were designed and tested to meet strict safety requirements. These include
safety agency examination, approval, and compliance with established environmental standards.
Your attention to the following safety guidelines helps to ensure the continued, safe operation of your
printer.

Operational Guidelines

Do not remove any paper trays while the printer is printing.
•
• Do not open the doors when the printer is printing.
Do not move the printer when it is printing.
•
• Keep hands, hair, neckties, and so on, away from the exit and feed rollers.
Covers, which require tools for removal, protect the hazard areas within the printer. Do not remove
•
the protective covers.
• Do not override any electrical or mechanical interlock devices.
Do not attempt to remove paper that is jammed deeply inside the product. Power off the printer
•
promptly and contact your local Xerox representative.
Ensure that the rear right cover is attached. Open this cover to connecting an interface cable.
•

Ozone Release

This printer produces ozone during normal operation. The amount of ozone produced is dependent on
copy volume. Ozone is heavier than air and is not produced in amounts large enough to harm anyone.
Install the printer in a well-ventilated room.
For more information in the United States and Canada, go to www.xerox.com/environment.

Printer Location

• Place the printer on a level, solid, non-vibrating surface with adequate strength to hold its weight. To
find the weight for your printer configuration, refer to
• Do not block or cover the slots or openings on the printer. These openings are provided for ventilation
and to prevent overheating of the printer.
• Place the printer in an area where there is adequate space for operation and servicing.
Place the printer in a dust-free area.
•
• Do not store or operate the printer in an extremely hot, cold, or humid environment.
• Do not place the printer near a heat source.
Do not place the printer in direct sunlight to avoid exposure to light-sensitive components.
•
• Do not place the printer where it is directly exposed to the cold air flow from an air conditioning
system.
• Do not place the printer in locations susceptible to vibrations.
16 Xerox ® WorkCentre
User Guide
® EC7836/EC7856 Color Multifunction Printer
Physical Specifications on page 282.