Table of Contents
Advertisement
PCturbo
286e
5)
Redirecting LPTl to COM2, setting
baud rate at 1200, and setting up a
l20-kilobyte buffer to hold printer
output:
prtspool Ipt1=com2 /rate=1200 /m=120
EXAMPLES:
The next examples use more advanced
options.
o
You can type these commands from the
keyboard even if you have already
invoked PRTSPOOL.
I)
Redirecting LPT2 to COM! with a baud
rate of
9600;~
prtspool Ipt2:=coml: /rate=9600
2)
Redirecting LPTl to COM! and
conf iguring the serial port to 2400
baud, no parity, 7 data bits, !
stop bit:
prtspool Ipt1:=coml: /rate=2400,n,7,1
3)
~edirecting
LPTl to COM! and
configuring the serial port to 2400
baud, no parity, 7 data bits, !
stopbit, shutting off the default
DCD and DSR protocols and turning on
CTS protocol:
prtspool Ipt1:=coml: /rate=2400,n,7,1
/off=dcd,dsr /on=cts
B-30
Advertisement
Table of Contents
