'"'\
~
,
HARDWARE
INSTALLATION
1M/2M
Jumper
The jumpers labeled 1M and 2M indicate how
much memory is available, either 1MB or 2MB.
o
If the RAM da ugh tercard is not installed,
place the jumper in the
1M
position.
o
When the RAM daughter card is installed,
place the jumper in the 2M position.
This jumper indicates the amount of memory
available for Protected Memory and for
operating systems that can use more than 1MB
of memory.
RAM Daughtercard NOT Installed:
P
2M
- ' - '
DIM
Daughtercard Installed:
P
2M
-'-'
DIM
2-11