Table of Contents
Advertisement
-, ,
COMMAND SUMMARY
Use one command line for each drive you
wish to install. For exainple, to install
a 120K drive in DOS Memory, a 360K
drive in Protected Memory, and a 360K
drive in EMS Expanded Memory, use these
commands (system has 2 megabytes of EMS
on I PCturbo 286e and nothing using
COOO:O):
device=ramdisk.sys 120
Id
device=ramdisk.sys 360 Ie
device=ramdisk.sys 360
Ix
RAM-intact warm boot is available only on
RAM disks in Protected and EMS Expanded
Memory, not DOS Memory. If you have more
than one RAM disk in Protected or EMS
memory, the first one in Protected Or EMS
Memory specified in the CONFIG.SYS file
will determine the status for
ill
of
them.
EXAMPLE: .
I)
All examples are CONFIG.SYS files.
All examples using EMS Memory require
that the first line of the CONFIG.SYS
file is the device driver installing EMS.
See the manual for the EMS Memory board
you are using.
360K RAM disk in DOS Memory:
(maximum of 64 directory entries by
default)
U
d is optional because DOS Memory is the
default)
device=ramdisk.sys 360
Id
B-15
Advertisement
Table of Contents
