Table of Contents
Advertisement
---,
i
--,
:
!
COMMANDSUMMARY
DEFAULT:
RAM disks will be placed in DOS Memory.
RAM-Intact Warm Boot is active for all
RAM disks placed in Protected and EMS
Memory (so you won't lose the contents of
the RAM disk when warm booting)
USAGE:
As a device driver in a CONFIG.SYS (or
TURBO.SYS) file only.
CAUTION:
Data left in a RAM disk will be lost when
you turn off the power. For safety:
Use RAM disks for read-only data
(programs or data bases that are not
being updated).
-or-
~
the contents of your RAM disks onto
fixed or floppy disks as soon as you
finish with them.
NOTES:
You can have as many drives as DOS will
allow. Consult the manual for the
version of DOS you are using. (In DOS
3.0, this number can be changed by
placing lastdrive=n in your CONFIG.SYS
file, where n
=
the letter assigned to
the last drive.) Remember that DOS
limits the
l21l!l
number of drives,
including any fixed and floppy drives
that are already installed in your
system.
B-13
Advertisement
Table of Contents
