Table of Contents
Advertisement
PCturbo
286e
286 Card not Responding. Please check all
board jumpers and try again.
This means that the system cannot access the
PCturbo
286e
at all.
o
Check all jumper settings.
o
Check that the card is securely seated in
the host.
oRe-run INSTALL, making sure that you
en ter the correct jumper settings.
o
Check that the interrupt line selected
for the PCturbo is not used by any other
board in the system.
STARTUP ERROR - Not enough memory to load
This means that the host does not have enough
memory. The PCturbo 286e requires at least
l28K of memory on the host.
0-2
Advertisement
Table of Contents
