Storage Interface; Extension Interfaces; Binary Outputs; Analog/Binary Inputs - Omicron DANEO 400 User Manual

DANEO 400
4.5

Storage interface

This is an USB host port for connecting an external mass storage device, such as an external hard
disk or a flash drive.
The setting to save recordings on this external mass storage is made in the Recording section
(Storage) of DANEO Control.
4.6

Extension Interfaces

Accessories for DANEO 400 can be connected to these ports when available.
4.7

Binary outputs

These are four potential free relay contacts. The contacts can be activated by a post-trigger action to
signal the detection of a trigger condition, for example to trigger other devices.
The settings are made in the Recording section (Post-trigger) of DANEO Control.
4.8

Analog/binary inputs

These are ten inputs that can be either used as analog or binary inputs.
The configurations are made in Measurement System section (Inputs) of DANEO Control.
24