Front brake control
Refitting the front brake master cylinder
Locate the mounting clamp (8) of the complete master cylinder assembly (1) aligning it with the locating grub screw
on the handlebar.
Tighten the bolts (9) of the mounting clamp (8) to the specified torque (Sect. C 3,
sequence 1-2-1.
If any work has been carried out on the hose (19), follow the instructions given in Sect. G 3,
system.
Operation
Reconnect the brake hose to the
master cylinder
Fill the brake circuit
1
file:///C|/848/wsm/en/848_08_F_03_6_00.28.1.html (3 of 3) [11-6-2008 0:34:28]
Section reference
G 3,
Refitting the front brake system
D 4,
Filling the clutch circuit
WWW.PlanDeGraissage.ORG
Frame torque
settings), in the
Refitting the front brake