Ducati SUPERBIKE 848 MY 2008 Manual page 291

Handlebars
Fit the handlebar onto the fork leg and install the top yoke.
Important
When refitting the handlebars to the fork legs, position them relative to the top yoke by inserting the end of the
handlebar pin (7) into the slot (A) in the top yoke.
If the bolts (5) securing the handlebar to the fork leg were removed when removing the handlebars, apply the
recommended grease to their threads.
Tighten the bolts (5) to the specified torque (Sect. C 3,
To complete the RH handlebar refitting procedure, install the following parts:
Operation
Refit the headlight shell
Refit the throttle twistgrip
Refit the right-hand handlebar switch
Refit the front brake lever
Refit the top yoke
To complete the LH handlebar refitting procedure, install the following parts:
Operation
file:///C|/848/wsm/en/848_08_H_1_7_00.41.1.html (4 of 5) [11-6-2008 0:34:34]
Section reference
E 1, Refitting the headlight shell
F 1, Refitting the throttle twistgrip
P 5, Checking the right-hand
handlebar switch
F 3, Refitting the front brake master
cylinder
H 2, Refitting the steering head
components
Section reference
WWW.PlanDeGraissage.ORG
Frame torque settings).