Front mudguard
Disconnect the brake hose (A) from the clip (1).
Remove the retaining bolts (2) and recover the nylon washers (3).
Remove the front mudguard (4).
Notes
The clip (1) is secured to the front mudguard by means of a shear rivet (5) with two washers (6).
Refitting the front mudguard
Warning
Do not ride the motorcycle without the front mudguard. The front mudguard also acts as a brake hose support and
prevents the brake hose from fouling the wheel when braking.
Position the front mudguard (4) and refit the retaining bolts (2) with the washers (3).
Locate the front brake hose grommet (A) in the mudguard clip (1).
Tighten the bolts (2) to the specified torque (Sect. C 3,
file:///C|/848/wsm/en/848_08_E_4_4_00.24.1.html (2 of 3) [11-6-2008 0:34:27]
WWW.PlanDeGraissage.ORG
Frame torque
settings).