Ducati SUPERBIKE 848 MY 2008 Manual page 117

Diagnostic instruments
Aim the central green LED of the sensor (15) at the mid-point of the belt run, with the reader parallel to the belt and
at a distance of about 1 to 1.5 cm from it.
On the DDS tester (1), select the Measurement module function by pressing the corresponding icon; then press the
Belt Tension icon followed by the Start icon to access the Mechanical belt tension screen.
The socket to which the cable (Measurement Module) (3) is to be connected is indicated on the screen with a capital
letter: A, B or C.
file:///C|/848/wsm/en/848_08_D_5_5_00.19.1.html (10 of 47) [11-6-2008 0:34:24]
WWW.PlanDeGraissage.ORG