Ducati SUPERBIKE 848 MY 2008 Manual page 537

Clutch assembly: clutch-side crankcase cover
Inspect the oil seal (9) and renew it if necessary.
Reassembly of the clutch-side crankcase cover
Fit the plug (15) and the seal (14). Install the pressure switch (21) with its seal (20).
If the bush has been replaced, fully seat the new bush (8) in the slot in the cover using a suitable drift and a press.
If the oil seal (9) needs to be renewed, fit the new seal into the crankcase cover, positioning it so the side without a
spring is facing the circlip (11).
Before fitting, check that the edges of the circlip groove show no sign of burrs which might otherwise damage the oil
seal.
Then fit the shim (10) and the circlip (11).
Important
In order for the oil seal (9) to function correctly, it must have an assembly clearance that allows the circlip (13) to
rotate.
file:///C|/848/wsm/en/848_08_N_6B9_00.69.1.html (4 of 6) [11-6-2008 0:34:50]
WWW.PlanDeGraissage.ORG