Removal Of The Steering Head Components - Ducati SUPERBIKE 848 MY 2008 Manual

Steering
Turn the front forks to the right until the spacer (A) is seated against the frame top tube.
Turn the adjuster screw (8) on the opposite side to bring it into contact with the stop on the steering head.
Apply threadlocker to the thread of nut (9).
Hold the adjuster screw (8) firm and tighten the nut (9).
Turn the forks to the opposite side and repeat the process to adjust the other screw and tighten the relative lock nut.

Removal of the steering head components

Operation
Remove the side fairings
Remove the headlight shell
Remove the fork legs
Notes
All parts fitted to the top and bottom yokes, including the wiring and control cables, can remain on the motorcycle
provided they do not hinder the following operations.
Loosen the bolt (6) securing the top yoke (7) to the steering stem nut (4).
Remove the top yoke (7).
file:///C|/848/wsm/en/848_08_H_2_7_00.42.1.html (3 of 8) [11-6-2008 0:34:35]
Section reference
E 2, Removal of the side fairings
E 1, Removal of the headlight shell
G 2, Removal of the front forks
WWW.PlanDeGraissage.ORG