Ducati SUPERBIKE 848 MY 2008 Manual page 414

Lubrication system: oil cooler
Bold reference numbers in this section identify parts not shown in the figures alongside the text. Refer to the
exploded view diagram.
Removal of the lubrication system
Operation
Remove the side fairing panels
Drain the oil from the lubrication
system
Undo the nuts (A) on the feed and return hoses (7) and the nipples (5) and disconnect the hoses from the engine.
Unscrew the nipples (5) on the crankcase and recover the gaskets (4).
During removal, take care not to lose the O-rings (B) which ensure a tight seal.
Unscrew and remove the bolt (9) with the spacer (3) securing the oil cooler to the support (10). Remove the oil
cooler, withdrawing the pin (C) of the support (10).
The support (10) can now be removed by unscrewing the bolts (8).
file:///C|/848/wsm/en/848_08_N_2B9_00.59.1.html (2 of 6) [11-6-2008 0:34:42]
Section reference
E 2, Removal of the side fairings
D 4, Changing the engine oil and
filter cartridge
WWW.PlanDeGraissage.ORG