Ducati SUPERBIKE 848 MY 2008 Manual page 112

Diagnostic instruments
Connection to motorcycle
The tester requires a power supply of between 9 and 16 Volts DC.
When using the tester, take care never to allow the power supply to fall below the minimum voltage: this situation
could occur during engine starting and idling on motorcycles in which the battery is not in perfect working order. If
the tester detects a power supply voltage of less than 9 Volts, the current procedures will be aborted; when the
voltage returns to within the acceptable tolerance limits the procedure must initiated again from the beginning.
The DDS tester (1) may be powered from the motorcycle in any one of the following ways:
connect the battery power adapter (13) to the power connection socket (N) on the tester and to the motorcycle
-
battery;
file:///C|/848/wsm/en/848_08_D_5_5_00.19.1.html (5 of 47) [11-6-2008 0:34:24]
WWW.PlanDeGraissage.ORG