Ducati SUPERBIKE 848 MY 2008 Manual page 506

Cylinder head assemblies: valves - rocker arms
Refit the cylinder head covers
Refit the cylinder head assembly
Refitting the cylinder head assemblies
Before fitting the head, check that gasket is installed on the mating surface between head and cylinder (Sect. N 5,
Refitting the cylinder/piston
Notes
When fitting the gasket, side (E) with the stamped code must be in contact with the cylinder head.
Lower the cylinder head carefully over the studs. Take care not to damage the threads.
Fit the special washers (22) and nuts (21) onto the cylinder head studs.
file:///C|/848/wsm/en/848_08_N_4E9_00.66.1.html (23 of 24) [11-6-2008 0:34:48]
N 4.4, Refitting the camshafts
N 4.5, Refitting the cylinder head
assemblies
assembly).
WWW.PlanDeGraissage.ORG