Ducati SUPERBIKE 848 MY 2008 Manual page 583

Flywheel-alternator
Tighten the bolts (26) to the specified torque (Sect. C 3,
Lubricate the surface (L) of the driven gear (21) with engine oil.
Install the driven gear on the starter clutch, ensuring it is properly seated.
Notes
To facilitate installation, rotate the driven gear in the direction of the green arrow.
Hold the flywheel (17) with one hand and check that the driven gear can rotate freely in the direction of the green
arrow but not in the direction of the red arrow.
If either of these two conditions is not met, this means that the starter clutch has not been installed correctly.
file:///C|/848/wsm/en/848_08_N_8_9_00.73.1.html (12 of 18) [11-6-2008 0:34:52]
WWW.PlanDeGraissage.ORG
Engine torque settings), in the indicated sequence.