Ducati SUPERBIKE 848 MY 2008 Manual page 483

Cylinder head assemblies: camshafts
Check that the mating surfaces of the cylinder head and manifold are perfectly flat and clean and install the intake
manifold (25) on the cylinder head.
Relocate the expansion tank support (Sect. N 3.1,
Tighten the bolts (21) to the specified torque (Sect. C 3,
Operation
Refit the airbox
Refit the radiator
Refit the side fairings
1
file:///C|/848/wsm/en/848_08_N_4D9_00.65.1.html (13 of 13) [11-6-2008 0:34:46]
Refitting the expansion
Section reference
L 6, Refitting the airbox and throttle
body
N 3.2, Refitting the radiator
E 2, Refitting the side fairings
WWW.PlanDeGraissage.ORG
tank).
Engine torque settings) in a crosswise pattern (1 2 3 4).