Ducati SUPERBIKE 848 MY 2008 Manual page 79

Maintenance operations
Attach a length of transparent plastic tubing to the bleed valve (3) and insert the other end of the
tubing in a container placed on the floor.
Loosen the bleed valve (3) to allow fluid to escape.
Warning
While filling the system, always keep the fluid level above the MIN mark to prevent the formation of
air bubbles in the circuit.
Allow the fluid to flow from the bleed valve (3) until it changes colour.
Tighten the bleed valve (3) and restore the correct fluid level in the reservoir.
Notes
Repeat this operation on each brake caliper.
Refit the cap (1), carrying out the removal operations in reverse order.
file:///C|/848/wsm/en/848_08_D_4_5_00.18.1.html (11 of 39) [11-6-2008 0:34:22]
WWW.PlanDeGraissage.ORG