Fuel Pressure Test - Ducati SUPERBIKE 848 MY 2008 Manual

Diagnostic instruments

Fuel pressure test

Notes
The on-screen icons used during this procedure are explained in a table at the end of this section.
Before doing this check, detach the fuel tank (Sect. L 2,
Slightly raise the fuel tank and place a pad underneath it so as to be able to access the fittings on the flange.
Remove the fuel feed hose (19).
Take the fuel pressure pipe test (17) and connect one end (D) to the outlet fitting on the tank and the other end (E)
to the fuel feed hose (19) in this way, the fuel pressure can be measured at the test outlet (F).
Connect the pressure sensor (5) to the test outlet (F) of the pipe (17) to transform the pressure signal into an
electrical signal.
file:///C|/848/wsm/en/848_08_D_5_5_00.19.1.html (30 of 47) [11-6-2008 0:34:24]
WWW.PlanDeGraissage.ORG
Removal of the fuel tank) from the bike, without removing it.