Diagnostic instruments
Switch on the DDS tester (1); see paragraph entitled
Connect the power and diagnostics cable (Measurement Module) (3) to the measurement module connector (E) on
the DDS tester (1).
Connect the pressure sensor (5) to socket (A) or (C) of the cable (3).
On the DDS tester (1), select the Measurement module function by pressing the corresponding icon; then press the
Pressure Test icon (F) followed by the Start icon (G).
file:///C|/848/wsm/en/848_08_D_5_5_00.19.1.html (31 of 47) [11-6-2008 0:34:24]
WWW.PlanDeGraissage.ORG
Tester power supply
.