Crankcase assembly: crankcase halves
Remove the bolts (2), remove the hoses (17) and recover the O-rings (26).
Overhaul of the crankcase halves
Carefully examine the engine crankcase halves.
Check that the surfaces of the crankcases are perfectly flat using a reference surface.
Check that the bearings (1) and (18) are in good condition. Note that the main bearings must always be changed in
pairs (refer to the procedure below in
file:///C|/848/wsm/en/848_08_N_9B9_00.75.1.html (5 of 24) [11-6-2008 0:34:54]
Main bearings
WWW.PlanDeGraissage.ORG
).