Ducati SUPERBIKE 848 MY 2008 Manual page 187

Seat seat cowling and side panels
and feed the wiring (N) through the aperture (P).
Refitting the seat cowling heat shield
Refit the heat shield (19) to the flanges (21). Position the support (17) and tighten the nuts (18). Refit the lower front
bolts (11) securing the heat shield (19). Tighten the bolts (11) and nuts (18) to the specified torque (Sect. C 3,
Frame torque settings).
Refit the exhaust silencers and the relative clamps as indicated in Sect. L 8,
Refitting the seat cowling
Refit the seat cowling (6) to the heat shield (19), pushing the cowling towards the rear of the bike so that it engages
the catches (D) on the shield (19).
file:///C|/848/wsm/en/848_08_E_3_4_00.23.1.html (10 of 14) [11-6-2008 0:34:26]
WWW.PlanDeGraissage.ORG
Refitting the exhaust system.