Diagnostic instruments
Connect the pressure sensor (5) to socket (A) or (C) of the cable (3).
Notes
Measure the compression on one cylinder at a time.
On the DDS tester (1), select the Measurement module function by pressing the corresponding icon; then press the
Cylinder Compression icon (D) followed by the Start icon (E).
file:///C|/848/wsm/en/848_08_D_5_5_00.19.1.html (28 of 47) [11-6-2008 0:34:24]
WWW.PlanDeGraissage.ORG