Ducati SUPERBIKE 848 MY 2008 Manual page 416

Lubrication system: oil cooler
Insert a washer (6) on each nipple (5) and apply the recommended threadlocker to the threads on the cooler side.
Notes
The washer (6) should be positioned with the square edge side facing the cooler.
Fit the nipples (5) to the oil cooler (1) and, while counterholding the hex nuts (E), tighten them to the specified
torque (Sect. C 3, Engine torque
Lubricate the O-rings (B) of the two oil hoses (7) and the threads of the nipples (5) with engine oil.
Attach the hoses to the nipples (5) on the cooler, finger-tightening the union nuts (E).
Tighten the union nuts (E) to the specified torque (Sect. C 3,
nuts on the nipples.
file:///C|/848/wsm/en/848_08_N_2B9_00.59.1.html (4 of 6) [11-6-2008 0:34:42]
settings).
WWW.PlanDeGraissage.ORG
Engine torque settings) while counterholding the hex