Ducati SUPERBIKE 848 MY 2008 Manual page 25

Hazardous Products - Warnings
General advice on repair work
Always use top quality tools. When lifting the motorcycle, only use devices that comply fully with the
-
relevant European directives.
When working on the motorcycle, always keep the tools within reach, ideally in the order required,
-
and never put them on the motorcycle or in hard-to-reach or inaccessible places.
- The workplace must be kept clean and tidy at all times.
- Always replace gaskets, seals and split pins with new parts.
When loosening or tightening nuts and bolts, always start with the largest or start from the centre;
-
tighten nuts and bolts to the specified torque working in a crosswise sequence.
- Always mark any parts and positions which might easily be confused at the time of reassembly.
- Use exclusively Ducati original replacement parts and the recommended brands of lubricants.
- Use special service tools where specified.
Ducati Technical Bulletins often contain updated versions of the service procedures described in this
-
manual. Check the latest Bulletins for details.
file:///C|/848/wsm/en/848_08_A_3_3_00.5.1.html (3 of 3) [11-6-2008 0:34:12]
WWW.PlanDeGraissage.ORG