Ducati SUPERBIKE 848 MY 2008 Manual page 427

Cooling system: radiator
Renewal of the cooling fan
Unscrew the three fan retaining bolts (8) and remove the fan (11) from the radiator.
Repeat the above operation for the other cooling fan (9).
Tighten the bolts (8) to the specified torque (Sect. C 3,
Refitting the radiator
Check that the rubber mountings (5) are present on the upper radiator brackets (10) and that the special bolt (13) is
fitted.
Insert the support of radiator (10) on the pin (A) on the right-hand side of the frame and then fit the bolt (3) with the
spacer (4) on the left-hand side.
Tighten the bolt (3) to the specified torque (Sect. C 3,
file:///C|/848/wsm/en/848_08_N_3B9_00.61.1.html (4 of 13) [11-6-2008 0:34:43]
WWW.PlanDeGraissage.ORG
Frame torque settings).
Frame torque settings).