Rear suspension
Removal of the rear suspension rocker arm
Disconnect the top of the rear shock absorber from the rocker arm as described in Removal of the rear shock
absorber in this section.
Separate the tie-rod (14) and the rocker arm (8) by unscrewing the bolt (4) and recover the bushes (11).
Before removing the rocker arm (8) from the frame, check the play of its internal needle roller bearings (7).
Grasp the rear end of the rocker arm and push and pull it in all directions.
If excessive play is encountered, the bearings need to be renewed.
To remove the rocker arm (8) from the frame, unscrew the nut (3) and withdraw the washer (2).
file:///C|/848/wsm/en/848_08_G_7_8_00.38.1.html (4 of 9) [11-6-2008 0:34:33]
WWW.PlanDeGraissage.ORG