Rear swingarm
Inspecting the swingarm pivot shaft
Before refitting the swingarm pivot shaft (1), check it carefully for distortion.
Roll the shaft on a reference surface and measure maximum distortion using a feeler gauge (see Sect. C 1.1,
wheel).
Overhauling the rear swingarm
Inside the swingarm (4), at the point at which it pivots on the frame, there are a pair of ball bearing races (19) on the
right-hand side and a pair of roller bearings (25), with seal rings (23), on the left-hand side.
file:///C|/848/wsm/en/848_08_G_5_8_00.36.1.html (9 of 15) [11-6-2008 0:34:32]
WWW.PlanDeGraissage.ORG
Rear