HPE ProLiant DL385 Gen10 Plus v2 Maintenance And Service Manual page 94

To replace the component, reverse the removal procedure.
Removing and replacing the Pensando DSP DSC-25 2p SFP28 card Removing and replacing the Pensando DSP DSC-25 2p SFP28 card
Decommissioning the Pensando DSP DSC-25 2p SFP28 card Decommissioning the
Procedure Procedure
Before removing the DSC-25 card from the server, you must first decommission the card using the Pensando Policy and Services
Manager (PSM).
For more information, see Pensando Distributed Services Card for Single-Wire Management (DSC-25-SWM) Removal/Replacement
Guide on the Hewlett Packard Enterprise website (https://www.hpe.com/support/dsc25-replacement
Removing the Pensando DSP DSC-25 2p SFP28 card Removing the Pensando DSP DSC-25 2p SFP28 card
NOTE: NOTE:
Images might differ from the actual product.
Prerequisites Prerequisites
The DSC-25 card has been decommissioned .
Procedure Procedure
1. Observe the following alerts:
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system WARNING:
components to cool before touching them.
Pensando DSP DSC-25 2p SFP28 card
https://www.hpe.com/support/dsc25-replacement).
HPE ProLiant DL385 Gen10 Plus v2 Server Maintenance and Service Guide 94