Table of Contents
Advertisement
b. Remove the pin field cover cap.
CAUTION:
CAUTION:
To prevent the risk of damaging the pins in the processor socket, do not reinstall the pin field cover cap after
removing it.
c. Hold the lift tabs near the front end of the rail frame, and then pivot the rail frame to the closed position.
A click sound indicates that the rail frame is properly engaged.
5. Close the force frame.
CAUTION:
CAUTION:
Do not overtighten the screws as this might damage the system board or the processor socket.
6. Apply new thermal grease to the processor in the pattern shown in the following image. Use the full contents of the thermal grease
syringe.
HPE ProLiant DL385 Gen10 Plus v2 Server Maintenance and Service Guide
113
Advertisement
Table of Contents
