HPE ProLiant DL385 Gen10 Plus v2 Maintenance And Service Manual page 69

Secondary and tertiary riser cage
To replace the component, reverse the removal procedure.
Removing and replacing the SFF universal media bay Removing and replacing the SFF universal media bay
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
HPE ProLiant DL385 Gen10 Plus v2 Server Maintenance and Service Guide 69